DIY Canvas Art

We’ve had this large blank wall in our dining room, desperately screaming for art. My husband and I contemplated purchasing a traditional piece of art, but it would need to fit our taste, budget, and decor. Our budget really limited us…not that we couldn’t afford items so much as I couldn’t see spending so much money on one piece of art that I would probably want to donate in a few years. Besides, we were hoping to find something with personal meaning or significance.

One idea was to print one of our photos onto canvas through a local drugstore. Eh. Large canvas pieces tend to be rather spendy. A few years back we had Kinkos print a black and white drafting/engineering for roughly $6.00 and placed it behind an old window frame. It’s a great idea, but I wanted something different for our dining room. And…we already have an old window bar sign in that room!

Our solution was to create our own mini canvas prints with personal photos and Mod Podge (seriously love that stuff). For the first time EVER, I remembered to take progress photos to share a tutorial. I’m not sure about everyone else, but my “easy” projects always take much longer than expected. Mostly, it’s related to craft ADD and my failure to follow directions. (Those who know me would say this is odd, unlike me. A good friend said, “it’s cause you’re a libra and part way through you think, I got this and toss the directions aside.” It’s true, very true.) This project didn’t seem to take too long. Why? I had no directions. I made it up as I went. But, for those of you who want them, here are the steps.

Materials
8×8 photos
8×10 canvas (I got a 10 pack with a 50% off coupon from Michael’s)
Mod Podge
Foam brush
Paper cutter
Graphite or Carbon copy paper
Paint pen
Pencil
Printed font/lettering preference

1. Print your photos and buy your materials (all of them, the first time around). I used the Walgreens App and printed 8×8 photos from my Instagram account. You could also print other size photos and cut to fit any size canvas.

2015/01/img_1330.jpg

2. I cut my photos down to 7 and 3/4 inch square to help them fit the canvas better. As with most first timers, I learned this the hard way. The true 8×8 size was not as easy to Mod Podge and would probably have not worked as well.

2015/01/img_1329.jpg

3. I covered the area of the canvas where the photo would be with Mod Podge to assist with photo adherence. *Action shots while in motion are not my specialty!

2015/01/img_1328.jpg

4. & 5. After placing the photo down, I covered with a thin layer of Mod Podge. I let each coat dry for roughly 15 minutes then added another. I did three layers total all in the same direction. You could go vertical, then horizontal, and vertical again to create a thatched look. I opted for all vertical strokes.

2015/01/img_1327.jpg

2015/01/img_1326.jpg

6. After I was content with my Mod Podge layers, I sprayed with a coat of sealant. Yep, just one. This sh*t scares me! I use it in the basement and it’s not as open/airy as I would prefer. I open the windows, but when the gas kicks on I fear blowing up the house. So…don’t do I as do and follow the instructions! I would probably have done 2-3 coats if I weren’t a scaredy cat.

2015/01/img_1325.jpg

7. If interested, label the photos. I printed out the size and style of font desired from my computer. I used a small piece of graphite paper atop the canvas and put the printer paper on top that, then lightly traced the lettering. This gave a nice base to use the paint pen versus freehand.

2015/01/img_1324.jpg

8. Stand back and admire your work. I love the look, they remind me of old Polaroids! I also love that these are all places we’ve been, photos I took, and were inexpensive enough to be changed out when I get bored of looking at them.

2015/01/img_1323.jpg

9. Hang on the wall. We used 3M photo hanging strips (the canvas are super light) and a laser level to create this layout.

2015/01/img_1322.jpg

Advertisements

DIY Holiday Decor

20140103-183921.jpg

I made this last year as a gift to a friend who provided bells for my craft intentions. It was super simple and easy. For this particular design, I purchased wood letters from JoAnn’s as well as sale glitter ribbon and a single sheet of scrapbook paper. Well, truth be told I always buy and additional sheet in case I screw up the first!
The bell was a gold or green color not appropriate for my vision, so I painstakingly hand painted several layers on. In retrospect, spray paint may have been easier! The bell had an awful attachment that was easily removed. I used a wire bread tie to attach the bow to the top of the bell. Surprisingly, it sits fairly well on its own, but you could glue it to a stand if needed.
I Mod Podged the paper to the letters. When dry, I flipped them over and used an exacto knife to carefully trim away excess. I sealed with a few more layers of Mod Podge and voila!